Products
-
16 Way SMA Power Dividers & RF Power Splitter
Features:
1. Low inertion Loss
2. High Isolation
3. Excellent Amplitude Balance
4. Excellent Phase Balance
5. Frequency Covers from DC-18GHz
Concept’s power dividers and combiners are used in aerospace and defense, wireless, and wireline communications applications,which are available in a variety of connectorized with 50 ohm impedance
-
90 Degree Hybrid Coupler
Features
• High Directivity
• Low Insertion Loss
• Flat, broadband 90° phase shift
• Custom performance and package requirements available
Our Hybrid Coupler are available in narrow and broadband bandwidths making them ideal for applications including, power amplifier, mixers, power dividers / combiners, modulators, antenna feeds, attenuators, switches and phase shifters
-
180 Degree Hybrid Coupler
Features
• High Directivity
• Low Insertion Loss
• Excellent Phase and Amplitude Matching
• Can be customized to suit your specific performance or package requirements
Applications:
• Power amplifiers
• Broadcast
• Laboratory test
• Telecom and 5G Communication
-
SMA DC-18000MHz 4 Way Resistive Power Divider
CPD00000M18000A04A is a Resistive power divider with 4 way SMA connectors that operates from DC to 18GHz. Input SMA female and outputs SMA female. Total loss is the 12dB splitting loss plus insertion loss. Resistive power dividers have poor isolation between ports and therefore they are not recommended for combining signals. They offer wideband operation with flat and low loss and excellent amplitude and phase balance to 18GHz . The power splitter has a nominal power handling of 0.5W (CW) and a typical amplitude unbalance of ±0.2dB. The VSWR for all ports is 1.5 typical.
Our power divider can split an input signal into 4 equal and identical signals and allows operation at 0Hz, so they’re ideal for Broadband applications. The downside is there’s no isolation between ports, & resistive dividers are normally low power, in the range of 0.5-1watt. In order to operate at high frequencies the resistor chips are small, so they don’t handle applied voltage well.
-
RF Coaxial Isolator and Circulator
Features
1. High power handling up to 100W
2. Compact Construction – Lowest size
3. Drop-in, Coaxial, Waveguide structures
Concept offers a wide range of narrow and wide bandwidth RF and microwave isolator and circulator products in coaxial, drop-in and waveguide configurations, which are designed to operate in assigned bands from 85MHz to 40GHz.
-
IP67 Low PIM Cavity Combiner , 698-2690MHz/3300-4200MHz
The CUD00698M04200M4310FLP from Concept Microwave is a IP67 Cavity Combiner with passbands from 698-2690MHz and 3300-4200MHz with Low PIM ≤-155dBc@2*43dBm. It has an insertion loss of less than 0.3dB and an isolation of more than 50dB. It is available in a module that measures 161mm x 83.5mm x 30mm. This RF cavity combiner design is built with 4.3-10 connectors that are female gender. Other configuration, such as different passband and different connector are available under different model numbers.
-
Microwave and Millimete Waveguide Filters
Features
1. Bandwidths 0.1 to 10%
2. Extremely Low Insertion Loss
3. Custom Design for Customer Specific Requirements
4. Avaliable in Bandpass , Lowpass , Highpass , Band-stop and Diplexer
Waveguide filter is an electronic filter constructed with waveguide technology. Filters are devices used to allow signals at some frequencies to pass (the passband), while others are rejected (the stopband). Waveguide filters are most useful in the microwave band of frequencies, where they are a convenient size and have low loss. Examples of microwave filter use are found in satellite communications, telephone networks, and television broadcasting.
-
RF Fixed Attenuator & Load
Features
1. High Precision and High Power
2. Excellent accuracy and repeatability
3. Fixed attenuation level from 0 dB up to 40 dB
4. Compact Construction – Lowest size
5. 50 Ohm impedance with 2.4mm, 2.92mm, 7/16 DIN, BNC, N, SMA and TNC connectors
Concept offering various high precision and high power coaxial fixed attenuators cover the frequency range DC~40GHz. The average power handling is from 0.5W to 1000watts.We are ability to match custom dB values with a variety of mixed RF connector combinations to make a high power fixed attenuator for your specific attenuator application.
-
IP65 Low PIM Cavity Duplexer ,380-960MHz /1427-2690MHz
The CUD380M2690M4310FWP from Concept Microwave is a IP65 Cavity Duplexer with passbands from 380-960MHz and 1427-2690MHz with Low PIM ≤-150dBc@2*43dBm. It has an insertion loss of less than 0.3dB and an isolation of more than 50dB. It is available in a module that measures 173x100x45mm. This RF cavity combiner design is built with 4.3-10 connectors that are female gender. Other configuration, such as different passband and different connector are available under different model numbers.
-
SMA DC-18000MHz 2 Way Resistive Power Divider
CPD00000M18000A02A is a 50 Ohm resistive 2-Way power divider/combiner.. It is available with 50 Ohm SMA female coaxial RF SMA-f connectors. It operates DC-18000 MHz and is rated for 1 Watt of RF input power. It is constructed in a star configuration. It has the functionality of a RF hub because every path through the divider/combiner has equal loss.
Our power divider can split an input signal into two equal and identical signals and allows operation at 0Hz, so they’re ideal for Broadband applications. The downside is there’s no isolation between ports, & resistive dividers are normally low power, in the range of 0.5-1watt. In order to operate at high frequencies the resistor chips are small, so they don’t handle applied voltage well.
-
SMA DC-8000MHz 8 Way Resistive Power Divider
CPD00000M08000A08 is a resistive 8-way power splitter with a typical insertion loss of 2.0dB at each output port across the frequency range of DC to 8GHz. The power splitter has a nominal power handling of 0.5W (CW) and a typical amplitude unbalance of ±0.2dB. The VSWR for all ports is 1.4 typical. The RF connectors of the power splitter are female SMA connectors.
The advantages of resistive dividers are size ,which can be very small since it contains only lumped elements and not distributed elements and they can be extremely broadband. Indeed, a resistive power divider is the only splitter that works down to zero frequency (DC)
-
Duplexer/Multiplexer/Combiner
Features
1. Small size and excellent performances
2. Low passband insertion loss and high rejection
3. SSS, cavity, LC, helical structures are avaliable according to different applications
4. Custom Duplexer, Triplexer, Quadruplexer, Multiplexer and Combiner are avaliable